Global navigation

   Documentation Center
   eZ Studio & eZ Platform
     User Manual
     Technical Manual
   eZ Publish 4.x / legacy

eZ Publish (5.x)

eZ Publish 5.x | For eZ Platform & eZ Studio topics see Technical manual and User manual, for eZ Publish 4.x and Legacy topics see eZ Publish legacy

Skip to end of metadata
Go to start of metadata

We will start by going through the various ways to find and retrieve content from eZ Publish using the API. While this will be covered in further dedicated documentation, it is necessary to explain a few basic concepts of the Public API. In the following recipes, you will learn about the general principles of the API as they are introduced in individual recipes.

Displaying values from a Content item

In this recipe, we will see how to fetch a Content instance from the repository, and obtain its Field's content. 

Let's first see the full code. You can see the Command line version at

Viewing content

Let's analyze this code block by block.

This is the initialization part. As explained above, everything in the Public API goes through the repository via dedicated services. We get the repository from the service container, using the method get() of our container, obtained via $this->getContainer(). Using our $repository variable, we fetch the two services we will need using getContentService() and getFieldTypeService().

Everything starting from line 5 is about getting our Content and iterating over its Fields. You can see that the whole logic is part of a try/catch block. Since the Public API uses Exceptions for error handling, this is strongly encouraged, as it will allow you to conditionally catch the various errors that may happen. We will cover the exceptions we expect in a next paragraph.

The first thing we do is use the Content Service to load a Content item using its ID, 66: $contentService->loadContent( 66 ). As you can see on the API doc page, this method expects a Content ID, and returns a Content Value Object.

This block is the one that actually displays the value.

It iterates over the Content's (Content Object) fields using the ContentType's (Content Class) FieldDefinitions (Content Class Attribute) ($contentType->fieldDefinitions).

For each Field Definition (Content Class Attribute), we start by displaying its identifier ($fieldDefinition->identifier). We then get the FieldType (Datatype) instance using the FieldType Service ($fieldTypeService->getFieldType( $fieldDefinition->fieldTypeIdentifier )). This method expects the requested FieldType's identifier, as a string (ezstring, ezxmltext...), and returns an eZ\Publish\API\Repository\FieldType object.

The Field Value object (Content Object Attribute) is obtained using the getFieldValue() method of the Content Value Object which we obtained using ContentService::loadContent().

Using the FieldType object, we can convert the Field Value to a hash using the toHash() method, provided by every FieldType. This method returns a primitive type (string, hash) out of a Field instance.

With this example, you should get a first idea on how you interact with the API. Everything is done through services, each service being responsible for a specific part of the repository (Content, FieldType, etc).

Loading Content in different languages

Since we didn't specify any language code, our Field object is returned in the given Content item's main language. If you'd prefer it to fall back to the SiteAccess language(s), then take advantage of TranslationHelpers. Or if you want to use an altogether different language, you can specify a language code in the getField() call:

Exceptions handling

As said earlier, the Public API uses Exceptions to handle errors. Each method of the API may throw different exceptions, depending on what it does. Which exceptions can be thrown is usually documented for each method. In our case, loadContent() may throw two types of exceptions: NotFoundException, if the requested ID isn't found, and UnauthorizedException if the currently logged in user isn't allowed to view the requested content.

It is a good practice to cover each exception you expect to happen. In this case, since our Command takes the content ID as a parameter, this ID may either not exist, or the referenced content may not be visible to our user. Both cases are covered with explicit error messages.

Traversing a Location subtree

This recipe will show how to traverse a Location's subtree. The full code implements a command that takes a Location ID as an argument, and recursively prints this location's subtree.

In this code, we introduce the LocationService. This service is used to interact with locations (eZ Publish 4 nodes). We use two methods from this service: loadLocation(), and loadLocationChildren().

Loading a location

As for the ContentService, loadLocation() returns a  Value Object, here a Location. Errors are handled with exceptions: NotFoundException if the Location ID couldn't be found, and UnauthorizedException if the current repository user isn't allowed to view this location.

Iterating over a Location's children

LocationService::loadLocationChildren() returns a LocationList Value Objects that we can iterate over.

Note that unlike loadLocation(), we don't need to care for permissions here: the currently logged in user's permissions will be respected when loading children, and locations that can't be viewed won't be returned at all.

Full code

Should you need more advanced children fetching methods, the SearchService is what you are looking for.

Viewing Content Meta Data

Content is a central piece in the Public API. You will often need to start from a Content item, and dig in from its metadata. Basic content metadata is made available through ContentInfo objects. This Value Object mostly provides primitive fields: contentTypeId, publishedDate or mainLocationId. But it is also used to request further Content related Value Objects from various services.

The full example implements an ezpublish:cookbook:view_content_metadata command that prints out all the available metadata, given a content ID.

We introduce here several new services: URLAliasService, UserService and SectionService. The concept should be familiar to you now.

Services initialization

Setting the Repository User

In a command line script, the repository runs as if executed by the anonymous user. In order to identify it as a different user, you need to use the UserService as follows:

This may be crucial when writing maintenance or synchronization scripts.

This is of course not required in template functions or controller code, as the HTTP layer will take care of identifying the user, and automatically set it in the repository.

The ContentInfo Value Object

We will now load a ContentInfo object using the provided ID and use it to get our Content's meta data


Getting Content Locations

We first use LocationService::loadLocations() to get the Locations for our ContentInfo. This method returns an array of Location Value Objects. In this example, we print out the Location's path string (/path/to/content). We also use URLAliasService::reverseLookup() to get the location's main URLAlias.

Limitations with multi-location

(version <= 5.2)

When Content has multiple Locations, note that sorting on Location properties cannot  work correctly. It's a limitation by design : SortClause\LocationPriority will not be limited to the locations under Criterion\ParentLocationId.

Location Search in 5.3

This limitation does not exist in Location Search. Migrating to version 5.3 adds the Location Search feature, and removes this limitation.
With Location Search, usage of Location Criterions and Sort Clauses with Content Search is deprecated. If search by Location properties is needed Location Search should be used.



We now want to list relations from and to our Content. Since relations are versioned, we need to feed the ContentService::loadRelations() with a VersionInfo object. We can get the current version's VersionInfo using ContentService::loadVersionInfo(). If we had been looking for an archived version, we could have specified the version number as the second argument to this method.

Browsing a Content's relations

We can iterate over the Relation objects array we got from loadRelations(), and use these Value Objects to get data about our relations. It has two main properties: destinationContentInfo, and sourceContentInfo. They also hold the relation type (embed, common...), and the optional Field this relations is made with.

ContentInfo properties

We can of course get our Content's metadata by using the Value Object's properties.

Primitive object metadata

Owning user

We can use UserService::loadUser() with content ownerId property of our ContentInfo to load the Content's owner as a User Value Object.

To get the current version's creator, and not the content's owner, you need to use the creatorId property from the current version's VersionInfo object.


The section's ID can be found in the sectionId property of the ContentInfo object. To get the matching Section Value Object, you need to use the SectionService::loadSection() method.


To conclude we can also iterate over the Content's version, as VersionInfo Value Objects.

We use the ContentService::loadVersions() method, and get an array of VersionInfo objects.

In this section we will cover how the SearchService can be used to search for Content, by using a Query and a combinations of Criteria you will get a SearchResult object back containing list of Content and count of total hits. In the future this object will also include facets, spell checking and "more like this" when running on a backend that supports it (for instance Solr).

Performing a simple full text search

In this recipe, we will run a simple full text search over every compatible attribute.

Query and Criterion objects

We introduce here a new object: Query. It is used to build up a Content query based on a set of Criterion objects.

version <= Ez Publish 5.2
version >= Ez Publish 5.3


Multiple criteria can be grouped together using "logical criteria", such as LogicalAnd or LogicalOr. Since in this case we only want to run a text search, we simply use a FullText criterion object.

The full list of criteria can be found on your installation in the following directory vendor/ezsystems/ezpublish-kernel/eZ/Publish/API/Repository/Values/Content/Query/Criterion. Additionally you may look at integration tests like vendor/ezsystems/ezpublish-kernel/eZ/Publish/API/Repository/Tests/SearchServiceTest.php for more details on how these are used.

NB: Be aware that the links point to code in the upcoming version (master) and might not represent the criteria in your eZ Publish version.

Criterion independence before 5.3

Note the criterion independance : Criterion are not related to each other by design and this can lead to a limitation in Content Search. See an example in the Criterion Independance example page.

Running the search query and using the results

The Query object is given as an argument to SearchService::findContent(). This method returns a SearchResult object. This object provides you with various information about the search operation (number of results, time taken, spelling suggestions, or facets, as well as of course, the results themselves.

The searchHits properties of the SearchResult object is an array of SearchHit objects. In valueObject property of SearchHit, you will find the Content object that match the given Query.

Tip: If you you are searching using a unique identifier, for instance using the content id or content remote id criterion, then you can use SearchService::findSingle(), this takes a Criterion and returns a single Content item, or throws NotFound exception if none is found.

Performing an advanced search

As explained in the previous chapter, Criterion objects are grouped together using Logical criteria. We will now see how multiple criteria objects can be combined into a fine grained search Query.

A Subtree criterion limits the search to the subtree with pathString, which looks like: /1/2/. A ContentTypeId Criterion to limit the search to Content of ContentType 1. Those two criteria are grouped with a LogicalAnd operator. The query is executed as before, with SearchService::findContent().

Performing a fetch like search

A search isn't only meant for searching, it also provides the future interface for what you in eZ Publish 4.x would know as a content "fetch". And as this is totally backend agnostic, in future eZ Publish 5.x versions this will be powered by either Solr or ElasticSearch meaning it also replaces "ezfind" fetch functions.

Following the examples above we now change it a bit to combine several criteria with both a AND and a OR condition.

ParentLocationId criterion limits the search to the children of location 2. An array of "ContentTypeId" Criteria to limit the search to Content of ContentType's with id 1 or 2 grouped in a LogicalOr operator. Those two criteria are grouped with a LogicalAnd operator. As always the query is executed as before, with SearchService::findContent().

Tip: Want to do a subtree filter ( in 4.x: fetch( 'content', 'tree' ) )? Change the location filter to use the Subtree criterion filter as shown in the advanced search example above.

Using in() instead of OR

The above example is fine, but it can be optimized a bit by taking advantage of the fact that all filter criteria support being given an array of values (IN operator) instead of as single value (EQ operator).

If your on eZ Publish 5.1+ you can use the new ContentTypeIdentifier Criterion:

eZ Publish 5.1+ (2013.01+)

Tip: All filter criteria are capable of doing an "IN" selection, the ParentLocationId above could f.e. have been provided "array( 2, 43 )" to include second level children in both your content tree (2) and your media tree (43). 

Performing a pure search count

In many cases you might need the number of Content items matching a search, but with no need to do anything else with the results.
Thanks to the fact that the "searchHits" property of the SearchResult object always refers to the total amount, it is enough to run a standard search and set $limit to 0. This way no results will be retrieved, and the search will not be slowed down, even when the number of matching results is huge.




  1. Hi,

    Maybe you add this to documentation: when you're working on multisite with one repository, you have to use the router service to generate urlalias and not the service:

  2. Take care when using $repository->setCurrentUser(): it will NOT change the currently-logged-in-user for the legacy stack.

    So if your code later on still relies on Legacy stack, you need to switch the current user for that as well, eg:


        $kernel = $this->getContainer()->get( 'ezpublish_legacy.kernel' );
            function() {
                \eZUser::setCurrentlyLoggedInUser( \eZUser::fetch( 14 ), 14 );
  3. The line 15 of the Viewing content code example should be:

    $field = $content->getField( $fieldDefinition->identifier );

    As in the command line version example:

  4. Mauricio Sánchez thank you for your input, I corrected the code as you suggested.

  5. I think it is time that this page mentioned the LocationQuery.

    So far, across the whole internet, it seems to be mentioned only at


  6. About the tohash() call that editors are trying to fix today: its usage is still broken, as it is not supposed to return a string. Hence its output should not be sent as-is to writeln() call...