Path / documentation / ez publish / technical manual / 3.8 / installation / the setup wizard

Caution: This documentation is for eZ Publish legacy, from version 3.x to 5.x.
For 5.x documentation covering Platform see eZ Documentation Center, for difference between legacy and Platform see 5.x Architecture overview.

The setup wizard

This section contains a comprehensive guide through the web based setup wizard of eZ Publish. The setup wizard is designed to ease the initial configuration of the system. It can be started using a web browser when the necessary installation steps (described in the previous sections) are completed. The setup wizard will automatically start the first time the "index.php" file (located in the root of the eZ Publish directory) is accessed/browsed.

The setup wizard does not store or modify any data before the final step; thus, it can be safely restarted by reloading the URL containing only the "index.php" part. The back button (located at the bottom) can be used to jump back to previous steps in order to modify settings. A typical setup cycle consists of 12 steps:

  1. Welcome page
  2. System check
  3. Outgoing E-mail
  4. Database choice (optional)
  5. Database initialization
  6. Language support
  7. Site selection
  8. Access method
  9. Site details
  10. Site security
  11. Site registration
  12. Finish

Please note that some of the steps will be omitted when an eZ Publish bundle is being installed.

Welcome page


Setup wizard - step 1

Step 1: Welcome page

This is the initial page of the setup wizard. By clicking "Next", the wizard will either jump to the "System Check" page (if some issues need to be fixed) or to the "Outgoing E-mail" page (if everything is okay).

System check


Setup wizard - step 2

Step 2: Issues

This page usually appears if critical issues/problems are detected. The setup wizard will display information about the issues that need to be fixed and suggestions describing how they can be fixed.


There may be several issues/problems. A suggestion to each problem is presented below the description of the problem itself. The setup wizard will probably suggest the execution of miscellaneous shell commands (in order to fix ownerships, permissions, etc.). These commands must be executed using a system shell. Simply copy the commands from the browser window and paste them into an open shell. The setup wizard will run the system check again when the "Next" button is clicked. The "System check" page will keep reappearing until all issues have been fixed (or ignored, see the next section). Once everything is okay, the setup wizard will display the next step.

Ignoring tests

Some issues/problems may be ignored using a checkbox labelled "Ignore this test". However, it is recommended to fix all issues rather than ignoring them.

Outgoing E-mail


Setup wizard - step 3

Step 3: Outgoing E-mail

eZ Publish uses E-mail to send out miscellaneous notices. This step is used to configure how eZ Publish delivers outgoing E-mail. There are two options:

  • Direct delivery through sendmail (must be available on the server)
  • Indirect delivery using an SMTP (Simple Mail Transfer Protocol) relay server

On Linux/UNIX: try to use sendmail; use SMTP if sendmail is unavailable. On Windows: use the SMTP setting.


Mail is delivered directly using the sendmail transfer agent. The agent must be running on the same host as the webserver is running on. The sendmail binary is usually available on most Linux/UNIX systems. If sendmail is not available then SMTP should be used.


Mail is delivered through an SMTP server. At the minimum, the hostname of the SMTP server must be specified.

Database type


Setup wizard - step 4

Step 4: Database choice

The setup will automatically detect database support that has been made available for the PHP scripting engine. If both MySQL and PostgreSQL is supported, the database choice dialog will appear. If PHP only is setup only to support one type of database, eZ Publish will automatically use it and thus the database choice dialog will not be displayed.

Database initialization


Setup wizard - step 5

Step 5: Database initialization

Information about the hostname of the server running the database engine, and a username/password combination needs to be provided. When clicking "Next" and if MySQL is used, the setup wizard will attempt to connect to the database. The setup will only continue if it is able to connect to the specified MySQL server with the specified username/password combination. PostgreSQL parameters are tested at a later stage during the setup wizard. (Note that even if the eZ Publish Extension for Oracle® Database is installed, the setup wizard will not let you use an Oracle database. The configuration must be done manually as described in the documentation of the database extension.)

Language support


Step 6: Language support

Step 6: Language support

This step allows the user to choose a language configuration for the site that is being installed. The setup wizard automatically pre-selects one of the languages according to your browser's language settings. Use the radio buttons to choose the default language (required), and the checkboxes to choose the additional languages (optional). All the selected languages will be added to the system and put on the list of prioritized languages. You will be able to use any of these languages for creating and translating your content after the setup wizard is finished. In eZ Publish 3.7 and earlier versions, objects had to be created in the primary language before they could be translated to additional languages. From 3.8, the primary language concept is gone and thus objects can be created using different languages (the first language of the object is recorded as its initial language).

Please note that choosing the default language at this step will determine default language, system locale and the most prioritized language for your site. If you select for example "German" as default language, then both locale and default language will be set to "ger-DE", your administration interface will be translated into German, and this language will be recorded as the most prioritized one for your site. Languages can be reconfigured at any time (even when a site is up and running) using the administration interface.

If the "Enable Unicode setup" checkbox in the bottom is selected then the site will be created using UTF-8 as character set. In this case, the database should also be created using this character set.

Note that in order to use UTF-8, you must be running MySQL 4.1 or later as previous versions only support the ISO character set. PostgreSQL also fully supports UTF-8.

Site selection


Step 7: Site selection

Step 7: Site selection

This step allows the user to select one of the standard site packages. These packages are intended to provide basic examples (News, Shop, Gallery, etc.) mostly for the purpose of demonstration and learning. However, it is possible to use them as a basic framework which you can extend/tweak in order to make it suitable for a specific purpose. A demo site usually contains some artwork (images), CSS code, actual content and template files. The plain type should be used when starting from scratch.

Site packages do not contain any objects. However, they contain dependencies to other packages plus specific settings and scripts. The setup wizard automatically fetches the list of available site packages from remote and internal repositories and asks the user to choose one. It will automatically download the selected site package and all its dependent packages, import them to the system and display a list of successfully imported packages as shown in the following screenshot. (This step will be omitted if all these packages are already stored under internal repositories.)

The list of imported packages

All dependent packages except for the site style package will be automatically installed.

Dealing with possible problems

If the wizard fails to connect the external packages repository, you will see an error message at the "Site selection" step. To solve this problem, you should manually download the desired site package and all the dependent packages it requires and then upload/import them via the setup wizard. The following instructions reveal how this can be done.

  1. Go to the packages download page. The "Setup Wizard Sites" section of this page contains the list of available site packages including the following information for each of them:

    • Name
    • Description
    • Dependencies

    Click on the name of the desired site package to download it. (A package is downloaded as an ".ezpkg" file.)

  2. Download all the dependent packages required by this site package (these are listed under "Dependencies"). You can download a package by clicking on its name. The packages are downloaded as ".ezpkg" files.
  3. Use the package import interface located at the bottom of the page in the setup wizard to upload/import the downloaded site package (click the "Choose" button, select the downloaded ".ezpkg" file that contains the site package and click the "Upload" button). The imported site package will appear on the list.
  4. Upload/import all the dependent packages using the same import interface.

Additional functionality

In eZ Publish 3.7 and earlier versions, the setup wizard included one more step called "Site functionality" that allowed to select additional features that should be installed. This step is no longer used. Additional functionality can be added after the setup wizard is finished by downloading the desired packages from the "Site functionality (Content objects)" section of the packages download page, importing the packages and installing them.

Access method


Setup wizard: step 8

Step 8: Site access configuration

This step allows the configuration of the access method that should be used when eZ Publish receives a request. There are three options:

  • URL
  • Port
  • Hostname


When the URL access method is used, eZ Publish selects the site that should be accessed based on the contents of the URL (in particular the part that comes right after "index.php"). This is the default and most generic option. It doesn't require any additional configuration. Use this setting when installing eZ Publish for the first time.


When the port access method is used, eZ Publish selects the site that should be accessed based on a port number that is specified in the URL. The port number must be appended to the hostname of the web server: "". This option requires additional web server and firewall configuration. Use this setting only if you know what you're doing.


When this access method is used, each site is assigned a unique hostname. For example, "" and "" can be assigned to the public and the administration interface respectively. This option requires additional web and DNS server configuration. Use this setting only if you know what you're doing.

Site details


Setup wizard - step 9

Step 9: Site details

This step allows the modification of settings related to the site that is being installed. Please note that the "User path" and "Admin path" access values depend on which access method you choose. When the port access method is used these values are port numbers. If you use the URL access method then "User path" and "Admin path" should only contain letters, digits and underscores. If the hostname access method is used then some additional symbols like dashes, dots and colons are allowed whereas underscores aren't.

The available databases will be displayed in the database dropdown menu. The "Refresh" button can be used to update the list (if a database is being created at this point). If the user has chosen Unicode setup on the "Language support" step then the database that uses UTF-8 as character set is required.

If the selected database already contains data, the "Site Details" page will reappear and ask what to do. Possible actions are:

  • Leave the data and add new
  • Remove existing data
  • Leave the data and do nothing
  • I've chosen a new database

Use the last option if another database has been chosen.

Site security


Setup wizard: step 10

Step 10: Site administrator

This step suggests some basic modifications that should be carried out in order to secure the site being installed. The suggested security tweak protects the configuration files from unwanted access. Don't worry about this unless you're setting up a site for public use.

Please note that the administrator's username (login) is set to "admin" by default and can not be changed. If you need another username for site administrator, you can install eZ Publish, create a new administrator user, log in as this user and remove the old one.

Site registration


Setup wizard: step 11

Step 11: Site registration

This step allows you to control whether the setup should send an information E-mail to eZ Systems or not. The information will be used internally for statistics and for improving eZ Publish. No confidential data will be transmitted and eZ Systems will not misuse or sell these details. The following information will be sent:

  • System details (OS type, etc)
  • The test results
  • The type of database that is being used
  • The name of the site
  • The URL of the site
  • The languages that were chosen


Setup wizard: step 12

Step 12: Finished

The setup wizard has finished, eZ Publish is ready for use. Click on one of the links to access the various interfaces (public site, administration interface, etc.).

Please note that it is possible to restart the installation wizard after its successful finishing by specifying "CheckValidity=true" in the "settings/override/site.ini.append.php" file so that the setup wizard will be initiated when trying to access the site.

Balazs Halasy (14/01/2005 12:18 pm)

Svitlana Shatokhina (03/11/2008 1:19 pm)


  • Troubleshooting: retrieving packages

    • Re: Troubleshooting: retrieving packages - Fedora Core 5

      It appears that SElinux policy in Fedora Core forbids httpd to make tcp connection to outside, thus preventing package download. To test, run as root: "setenforce 0" and try to install again.
  • There is no Access method in the setup wizard!!!

    There is no Access method in the setup wizard !!! In eZ publish 3.
    I wanted the localhost into the ??? How???
  • Access to User and Admin site

    I missed to save the page or note down URL of USER SITE and ADMIN SITE. How can I access them now?
  • 3.8.4 installation fails on ez Systems hosting partner

    Having uploaded 3.8.4 to a folder "ez". going to the <domain>/ez/ directory results in a kernel(20) error. Page says "Module not Found".

    Is there an issue with external hosts? or more an issue with this particular release?
  • Fatal error: A database transaction in eZ publish failed.

    Fatal error: A database transaction in eZ publish failed.

    The current execution was stopped to prevent further problems.
    You should contact the System Administrator of this site with the information on this page.
    The current transaction ID is TRANSID-abf3a8f2dd4b7823e0b76316ff75b5cc and has been logged.
    Please include the transaction ID and the current URL when contacting the system administrator.