Global navigation

   Documentation Center
   eZ Studio & eZ Platform
     User Manual
     Technical Manual
     Glossary
   eZ Publish 4.x / legacy

 
eZ Publish (5.x)

eZ Publish 5.x | For eZ Platform & eZ Studio topics see Technical manual and User manual, for eZ Publish 4.x and Legacy topics see eZ Publish legacy

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 50 Next »

The requirements for doing a normal installation must be met, read the "Requirements for doing a normal installation" section first!

This section will guide you through the following steps:

Setting up a database

A database must be created before running the setup wizard. The following text explains how to set up a database using either MySQL or PostgreSQL.

MySQL

  1. Log in as the root user (or any other MySQL user that has the CREATE, CREATE USER and GRANT OPTION privileges):

    Note that if MySQL is installed on the same server, the "--host" parameter can be omitted. If the "--port" parameter is omitted, the default port for MySQL traffic will be used (port 3306).

    The MySQL client should display a "mysql>" prompt.

  2. Create a new database:

    mysql> CREATE DATABASE <database> CHARACTER SET utf8;
  3. Grant access permissions:

    mysql> GRANT ALL ON <database>.* TO <user>@<ezp_host> IDENTIFIED BY '<password>';

    Note that if the specified user account does not exist, it will be created.

    ReferenceDescription
    <mysql_host>The hostname of the MySQL database server.
    <port>The port number that will be used to connect to the MySQL database server.
    <mysql_user>The MySQL user (if no user is set up, use "root").
    <mysql_password>The password that belongs to the <mysql_user>.
    <database>The name of the database, for example "my_new_database".
    <user>The username that will be used to access the database.
    <ezp_host>The hostname of the server on which eZ Publish will be running. (may be "localhost" if MySQL is installed on the same server).
    <password>The password you wish to set in order to limit access to the database.

PostgreSQL

  1. Log in as the postgres user (or any other PostgreSQL user that has sufficient privileges to create roles and databases):

    $ psql -h <psql_host> -p <port> -U <psql_user> -W

    Note that if PostgreSQL is installed on the same server, the "-h" parameter can be omitted. If the "-p" parameter is omitted, the default port for PostgreSQL traffic will be used (in most cases, port 5432).

    The PostgreSQL client will ask you to specify the password that belongs to the <psql_user>. If the password is correct, the client should display a "<psql_user>=#" prompt.

  2. Create a new database:

    postgres=# CREATE DATABASE <database> ENCODING='utf8';
  3. Create a new user:

    postgres=# CREATE USER <user> PASSWORD '<password>';
  4. Grant access permissions:

    postgres=# GRANT ALL PRIVILEGES ON DATABASE <database> TO <user>;

     

    Import the "pgcrypto" module into the new database:

    postgres=# \c <database>
    <database>=# \i '<path_to_pgcrypto>'
    ReferenceDescription
    <psql_host>The hostname of the PostgreSQL database server.
    <port>The port number that will be used to connect to the PostgreSQL database server.
    <psql_user>The PostgreSQL user (if no user is set up, use "postgresql").
    <database>The name of the database, for example "my_new_database".
    <user>The username that will be used to access the database.
    <password>The password you wish to set in order to limit access to the database.
    <path_to_pgcrypto>The path to the "pgcrypto.sql" file, for example "/usr/share/pgsql/contrib/pgcrypto.sql".

    Note for version 9.1+ of PostgreSQL users:
    The following changes might be necessary for these users:
    postgres=# \c <database>
    <database>=# CREATE EXTENSION pgcrypto;

Downloading eZ Publish

The latest community version of eZ Publish can be downloaded from http://share.ez.no/downloads

Enterprise version is available in your support portal or via partner portal.

Unpacking eZ Publish

Use your favorite tool to unpack the downloaded eZ Publish distribution to a web-served directory (a directory that is reachable using a web browser), or in case of virtual host mode it can be any folder.
The following example shows how to do this using the tar utility (to unpack a tar.gz file, assuming that the "tar" and the "gzip" utilities are installed on the system):

$ tar zxvf ezpublish-<version_number>-gpl.tar.gz -C <web_served_directory>
ReferenceDescription
<version_number>The version number of eZ Publish that was downloaded.
<web_served_directory>Full path to a directory that is served by the web server. This can be the path to the document root of the web server, or a personal web-directory (usually called "public_html" or "www", and located inside a user's home directory).

 

The extraction utility will unpack eZ Publish into a sub-directory called "ezpublish-<version_number>". Feel free to rename this directory to something more meaningful, for example "my_site".

Setting up folder permission

Important

In the 3 first folder permission setup options, always ensure to run application scripts and the web server with the appropriate UNIX user (must be same as you setup rights for below).

As for Apache you can control which user to use in your Apache configuration. Using PHP-FPM or SuExec module, you can even specify a user per virtual host.

Several cache, log and config folders must be writable both by the web server and the command line user, use one of the following alternatives to do this:

  • Using ACL on a system that supports chmod +a
    These shell commands will give proper permission to the web server and command line users.

    5.3 / 2014.05 and higher:

        $ cd /<ezp5-root>/
        $ sudo chmod +a "www-data allow delete,write,append,file_inherit,directory_inherit" \
          ezpublish/{cache,logs,config,sessions} ezpublish_legacy/{design,extension,settings,var} web
        $ sudo chmod +a "`whoami` allow delete,write,append,file_inherit,directory_inherit" \
          ezpublish/{cache,logs,config,sessions} ezpublish_legacy/{design,extension,settings,var} web

    5.0, 5.1 and 5.2:

        $ cd /<ezp5-root>/
        $ sudo chmod +a "www-data allow delete,write,append,file_inherit,directory_inherit" \
          ezpublish/{cache,logs,config} ezpublish_legacy/{design,extension,settings,var} web
        $ sudo chmod +a "`whoami` allow delete,write,append,file_inherit,directory_inherit" \
          ezpublish/{cache,logs,config} ezpublish_legacy/{design,extension,settings,var} web


  • Using ACL on a system that does not support chmod +a
    Some systems don't support chmod +a, but do support another utility called setfacl. You may need to enable ACL support on your partition and install setfacl before using it (as is the case with Ubuntu).
    5.3 / 2014.05 and higher:

        $ cd /<ezp5-root>/
        $ sudo setfacl -R -m u:www-data:rwx -m u:www-data:rwx \
          ezpublish/{cache,logs,config,sessions} ezpublish_legacy/{design,extension,settings,var} web
        $ sudo setfacl -dR -m u:www-data:rwx -m u:`whoami`:rwx \
          ezpublish/{cache,logs,config,sessions} ezpublish_legacy/{design,extension,settings,var} web

    5.0, 5.1 and 5.2:

        $ cd /<ezp5-root>/
        $ sudo setfacl -R -m u:www-data:rwx -m u:www-data:rwx \
          ezpublish/{cache,logs,config} ezpublish_legacy/{design,extension,settings,var} web
        $ sudo setfacl -dR -m u:www-data:rwx -m u:`whoami`:rwx \
          ezpublish/{cache,logs,config} ezpublish_legacy/{design,extension,settings,var} web
  • Using chown on systems that don't support ACL
    Some systems don't support ACL at all. You will either need to set your web server's user as the owner of the required directories.
    5.3 / 2014.05 and higher:

        $ cd /<ezp5-root>/
        $ sudo chown -R www-data:www-data ezpublish/{cache,logs,config,sessions} ezpublish_legacy/{design,extension,settings,var} web
        $ sudo find {ezpublish/{cache,logs,config,sessions},ezpublish_legacy/{design,extension,settings,var},web} -type d | sudo xargs chmod -R 775
        $ sudo find {ezpublish/{cache,logs,config,sessions},ezpublish_legacy/{design,extension,settings,var},web} -type f | sudo xargs chmod -R 664

    5.0, 5.1 and 5.2:

        $ cd /<ezp5-root>/
        $ sudo chown -R www-data:www-data ezpublish/{cache,logs,config} ezpublish_legacy/{design,extension,settings,var} web
        $ sudo find {ezpublish/{cache,logs,config},ezpublish_legacy/{design,extension,settings,var},web} -type d | sudo xargs chmod -R 775
        $ sudo find {ezpublish/{cache,logs,config},ezpublish_legacy/{design,extension,settings,var},web} -type f | sudo xargs chmod -R 664
  • Using chmod
    If you can't use ACL and aren't allowed to change owner, you can use chmod, making the files writable by everybody. Note that this method really isn't recommended as it allows any user to do anything.
    5.3 / 2014.05 and higher:

        $ cd /<ezp5-root>/
        $ sudo find {ezpublish/{cache,logs,config,sessions},ezpublish_legacy/{design,extension,settings,var},web} -type d | sudo xargs chmod -R 777
        $ sudo find {ezpublish/{cache,logs,config,sessions},ezpublish_legacy/{design,extension,settings,var},web} -type f | sudo xargs chmod -R 666

    5.0, 5.1 and 5.2:

        $ cd /<ezp5-root>/
        $ sudo find {ezpublish/{cache,logs,config},ezpublish_legacy/{design,extension,settings,var},web} -type d | sudo xargs chmod -R 777
        $ sudo find {ezpublish/{cache,logs,config},ezpublish_legacy/{design,extension,settings,var},web} -type f | sudo xargs chmod -R 666



Composer

For 5.3 and higher : Install Composer

Install composer and run update to get latest versions of packages before you continue with installation.

If you use a version control system, take care of versioning the composer.lock file.

Learn more on how to keep system further up to date  Using Composer

 

For pure legacy setup: Install Zetacomponents with Composer

As of eZ Publish 5.2, if you plan to use eZ Publish legacy only, as standalone (as in pointing apache to ezpublish_legacy folder or extracting only ezpublish_legacy), then Zetacomponents must be installed if you don't already have it via PEAR. For that, you will need to install Composer by running one of the following command from you eZ Publish root folder :

If you have curl installed:

curl -sS https://getcomposer.org/installer | php

If you don't have curl installed:

php -r "eval('?>'.file_get_contents('https://getcomposer.org/installer'));"

 

After Composer installation run the following command from the ezpublish_legacy/ folder :

php ../composer.phar install

 

Link assets

The download file should already have generated these assets for you as of 5.2 / 2013.07 during composer install, but in case file has been extracted on Windows, make sure to run these commands.

To be able to run eZ Publish 5 correctly, assets need to be exposed in the public "web" folder.

The following commands will first symlink eZ Publish 5 assets in "Bundles" and the second will symlink assets (design files like images, scripts and css, and files in var folder)  from eZ Publish Legacy

cd /<ezp5-root>
php ezpublish/console assets:install --relative --symlink web
php ezpublish/console ezpublish:legacy:assets_install --relative --symlink web
php ezpublish/console assetic:dump --env=prod web

Note: In both cases "web" is the default folder and can be skipped from the command. For symlinks on the first two commands you can either use --relative, --symlink, or none to get the command to copy assets. However make sure to also update "symfony-assets-install" in composer.json if you prefer something else then --relative which is the default.

Further information about alternative options is available with -h on each command, just like it is with the console itself using "php ezpublish/console -h".

Warning regarding APC usercache

If you are planning to use APC usercache for eZ Publish Persistence cache, please be sure to check the available notes here, before entering the setup wizard chapter.

Initiating the setup wizard

The setup wizard can be started using a web browser immediately after the previous steps (described in this section) are completed. It will be automatically run the first time someone tries to access/browse the "/ezsetup" url.

 

  • No labels